m

Blog

Fleet Utilisation Improvement Example: Fuel Control

Fleet Utilisation Improvement Example: Fuel Control

A lorry can be scheduled for ten productive hours and still lose a meaningful share of that time to avoidable fuel stops, missing records, unauthorised dispensing and maintenance surprises. This fleet utilisation improvement example shows how controlling the fuel point can expose those losses and help an operator put more available vehicle time to work – without adding a complicated layer of administration.

For fleet managers, utilisation is not simply a percentage on a monthly report. It is the practical question of whether the vehicles, drivers and equipment you already pay for are ready, authorised and profitable when work needs doing. Fuel data is one of the clearest places to start because every dispensing event should connect a person, a vehicle, a quantity, a time and a location.

A fleet utilisation improvement example in practice

Consider a regional civil engineering contractor operating 42 diesel vehicles: tippers, service vans, plant transporters and site support vehicles. The business has one depot tank and a mobile fuel bowser that serves several active sites. Work was available, but the fleet was not consistently delivering the planned number of productive shifts.

The operations director initially suspected that the answer was to acquire another vehicle. A closer review showed a different problem. Drivers queued at the depot fuel point at shift change. Fuel tickets were completed by hand, then entered into a spreadsheet days later. Supervisors could not quickly confirm which vehicle had been fuelled on site, and consumption anomalies were discovered only after invoices and driver sheets had been reconciled.

That delay created operational blind spots. A vehicle could appear available even when it had not received the fuel needed for the next assignment. A driver could take a vehicle assigned to another team. A fuel variance might be dismissed as an input error rather than investigated while the details were fresh. The business was measuring mileage and fuel spend, but it was not controlling the event at the pump.

The first change was straightforward: no fuel could be dispensed without user authorisation, a vehicle selection and a recorded meter reading where appropriate. Each transaction was captured in the cloud at the time of dispensing. The depot tank and mobile bowser followed the same accountable process, so site activity did not disappear into a separate paper trail.

Within weeks, the fleet team had a reliable view of who fuelled what, where and when. That did not magically create capacity. It did, however, give managers the evidence to remove the causes of lost capacity.

Where the extra productive time came from

The contractor grouped the findings into three operational issues: poor fuelling discipline, avoidable downtime and weak allocation decisions. Each needed a different response.

1. Shorter, more predictable fuel stops

The depot had been fuelling vehicles on a first-come, first-served basis. Morning queues were consuming paid driver time and delaying departures. Transaction records revealed the peak periods clearly enough to stagger fuelling by team and move some refuelling to the previous afternoon.

The result was not simply a faster pump. It was a more predictable start to the day. Drivers arrived at sites with fewer delays, and supervisors were not repeatedly rearranging work because two or three vehicles left late. This matters because small delays compound across a fleet. Ten minutes lost by 15 vehicles is two and a half hours of capacity that cannot be recovered once the working day is under way.

2. Faster response to abnormal consumption

Before controlled dispensing, the finance team could see that fuel spend was rising but could not easily isolate why. With real-time, vehicle-linked transaction data, the fleet manager identified a small number of exceptions: unusually high litres per hour on one piece of plant, repeated top-ups for a van that was not covering equivalent mileage, and fuel issued outside the normal operating window.

Those exceptions led to practical checks. One machine had a developing mechanical issue. The van’s assigned driver had been making unplanned trips between sites. The after-hours activity required an authorisation review. None of these findings would have been as useful if they had surfaced at month end.

Early intervention protected utilisation in two ways. It reduced the chance that a mechanical issue would become a roadside failure, and it stopped managers from making planning decisions based on misleading fuel and activity records. Better data does not replace maintenance inspections or driver conversations. It tells the right people where to look first.

3. More confident vehicle allocation

The operations team also used dispensing history alongside job schedules to challenge long-standing allocation habits. Some vehicles were routinely retained by teams that only needed them intermittently, while other crews hired external vehicles at short notice.

Fuel activity helped distinguish an asset that was genuinely working from one that was merely assigned. If a vehicle had no recorded use over several days, managers could ask whether it should be redeployed, scheduled for preventative maintenance or removed from the active pool. The decision still depended on operational context – a standby vehicle at an airport or emergency service operation has a legitimate purpose even if it travels little – but the conversation was based on evidence rather than assumption.

What changed after 90 days

The contractor did not claim that every vehicle should be moving every minute of every shift. That would be unsafe and unrealistic. Planned maintenance, driver breaks, loading time, traffic, site access restrictions and reserve capacity are all part of responsible fleet operation.

Instead, the team tracked whether available vehicles were completing scheduled work with less unplanned delay. After 90 days, the measures that mattered were clearer: fewer late starts linked to fuelling, faster investigation of fuel exceptions, less manual reconciliation and better visibility of underused assets. The business was able to defer the immediate purchase of an additional support vehicle because existing capacity was being deployed more effectively.

That is the value of a credible fleet utilisation improvement example. The gain is rarely one dramatic intervention. It comes from connecting small, controllable events to the larger question of asset availability.

The controls that make the difference

A report alone cannot improve utilisation. The process must make unauthorised or unrecorded activity difficult in the first place. At a minimum, fleet operators need fuel access tied to a verified user, a clear vehicle or asset reference, accurate litre capture and a timestamped location. Managers also need access to the information while it can still influence the next shift.

For multi-site fleets, consistency is just as important as detail. A depot tank, a satellite yard and a mobile fuel bowser should not each have their own disconnected method of issuing fuel. If one site uses paper tickets, another uses a keypad and a third relies on verbal approval, reconciliation will remain slow and accountability will remain incomplete.

FluidSecure from Manage Every Drop is designed around that control point. Authorised users can dispense through a smartphone-based process, while the system creates cloud-connected transaction records for fixed and mobile fuelling operations. Permissions can be changed quickly when a driver, contractor or vehicle assignment changes, reducing the exposure created by shared keys, fobs or informal workarounds.

The right configuration depends on the fleet. A small operator may prioritise an affordable way to secure a single tank and eliminate handwritten tickets. A larger organisation may need central permission management, standard reporting across multiple locations and clear audit records for procurement and finance. In both cases, the operational objective is the same: every litre issued should have an accountable destination.

How to apply this approach to your own fleet

Start by defining utilisation in terms your operation can act on. For one fleet, that may be scheduled jobs completed per available vehicle. For another, it may be productive engine hours, on-time departures or the reduction of hired-in vehicle days. Avoid relying on a single utilisation percentage that conceals the reasons behind it.

Next, map the route from fuel issue to operational reporting. Ask how long it takes to identify the driver, vehicle, quantity and location of a dispense. If the answer is hours or days, the fleet is making decisions with a lag. Identify where handwritten records, shared access credentials and unplanned site fuelling interrupt the chain of accountability.

Then establish a manageable exception process. Not every unusual transaction indicates theft or misuse. A high fuel issue may be justified by a long shift, a change in route, cold weather, plant loading or emergency work. The purpose of exception reporting is not to accuse drivers. It is to ensure that a manager can verify the reason promptly and take action where it is needed.

Finally, review fuel controls alongside maintenance and scheduling every week. A vehicle that repeatedly requires unexpected top-ups, misses planned departures or records abnormal consumption should appear in the same operational conversation as defects, booking conflicts and driver availability. That is when fuel data becomes a fleet management tool rather than an accounts exercise.

More utilisation should never mean pushing vehicles or drivers beyond safe limits. It should mean removing the uncertainty, leakage and avoidable delay that keep an otherwise capable fleet from doing the work it was acquired to do. Secure every dispense, review the evidence early, and let the next deployment decision be based on facts.

Post a comment

Your email address will not be published. Required fields are marked *

Manage Every Drop Inc.
151 Yonge Street
Suite 1100 Office 1139
Toronto ON, M5C 2W7

T: 1-647-367-4401
contact@manageeverydrop.ca